
Procore data value comes from how projects really unfold: RFIs, submittals, change orders, daily logs and schedule slips. AI builders license this de-identified construction history. Learn what it is worth and how to sell Procore data safely.
Construction is one of the least digitized big industries, and Procore is where much of its coordination has quietly been recorded. Every question a subcontractor asked, every submittal that bounced back, every change order that pushed the budget is a data point about how buildings actually get built.
The operational record inside Procore
A general contractor or specialty sub using Procore for several years has built a timeline of coordination across dozens or hundreds of projects. The parts buyers care about:
- RFIs: when a question was raised, which discipline it concerned, who it was routed to (by role), how long it sat, and whether it led to cost or schedule impact.
- Submittals: spec section, revision count, review turnaround, approve or revise-and-resubmit outcomes.
- Change events and change orders: reason codes, amounts, approval lag and how often potential changes became real ones.
- Daily logs: manpower counts by trade, weather conditions, delays and equipment on site.
- Schedules and punch lists: planned versus actual milestones, punch item categories and closeout time.
- Budget and commitments: cost codes, committed versus actual, and how variances developed over the project life.
This is process data: how decisions moved between owner, architect, GC and subs.
Why AI builders are hungry for construction workflows
General-purpose models can define an RFI. They cannot tell you which RFIs stall or which submittals always bounce back; that knowledge lives only in project histories.
De-identified Procore data helps buyers train:
- Project-risk forecasting that flags jobs likely to slip or overrun based on early RFI and change-order patterns.
- Coordination agents that draft, route and chase RFIs and submittals the way an experienced project engineer would.
- Estimating and budget models that learn where real costs drift from plan.
"Every industry is a geek away from being uberized," says founder Jeff Cline. Construction tech is moving fast, and the builders of these tools need real project records from firms that have them. Our guide on what data buyers want explains the demand side in more detail.
What stays out: de-identification for project data
We never take HIPAA/PHI data or personal customer data. Everything is de-identified before it leaves your control.
For construction records, de-identification goes beyond personal names. Before delivery we remove or generalize:
- Names, emails and phone numbers of every person in the directory, replaced with role labels (PM, superintendent, architect, sub foreman) or anonymous IDs.
- Owner and client identities, project names and exact site addresses, generalized to project type, size band and region if needed.
- Company names of subcontractors and vendors, replaced with trade category and anonymous vendor IDs.
- Attached drawings, photos and documents, which are excluded by default because they often carry title blocks, logos and addresses.
- Free-text RFI questions and log notes, which are scrubbed or dropped depending on what the buyer actually needs.
You see the final field list before anything moves. Owner contracts can restrict how project data is used, so review yours and talk to your attorney. The data licensing agreements guide covers common terms.
Finding your Procore counts
Two numbers get the conversation started: how many projects you have run in Procore and how many RFIs they generated.
Where to find it: Project and RFI counts.
The company project list (filtered to all statuses) gives total projects; each project's RFI tool shows its count, and your Procore admin can roll that up. Also note the earliest project start date and which tools you used consistently. Plug those into the valuation calculator for an illustrative range.
A sample Procore header list
A header sample is the list of column names in your exports. It contains no rows, no project names and no people. Buyers use it to understand structure before they bid.
For a combined RFI and change-order export, column names might look like:
- project_id_anon, project_type, project_size_band, region
- rfi_id, rfi_created_at, rfi_due_date, rfi_closed_at, rfi_status
- discipline, spec_section, ball_in_court_role, cost_impact_flag, schedule_impact_days
- submittal_id, submittal_type, revision_number, review_days, submittal_outcome
- change_event_id, change_reason_code, change_amount, approval_days, co_status
- log_date, trade_category, manpower_count, weather_condition, delay_flag
- cost_code, budgeted_amount, committed_amount, actual_amount
For a step-by-step on pulling this list, see the header sample how-to.
What makes one Procore dataset worth more than another
Buyers look for depth and consistency:
- Number of projects and years. A long run of completed projects shows the full lifecycle from preconstruction to closeout.
- Tool coverage. Firms that used RFIs, submittals, change orders and daily logs together offer a connected picture rather than fragments.
- Data hygiene. Consistent cost codes, statuses and dates matter more than sheer volume.
- Project mix. Healthcare, industrial, multifamily, civil and tenant improvement each teach different lessons; a varied portfolio is attractive, and so is deep focus in a rare niche.
- Uniqueness. Specialty trades and uncommon project types are scarce in training sets.
According to founder Jeff Cline, small companies have gotten over $100,000 for their data. Results vary; not a guarantee.
How a Procore data sale works, start to finish
- Tell us about the portfolio. Use the bid request form to share that you run Procore, how many years and projects, how many users, and roughly how many RFIs.
- Send headers, not files. Export the RFI, submittal, change order and daily log tools and share column names only.
- Watch buyers compete. Several buyers can bid, so you see the highest offer rather than a single take-it-or-leave-it number. Jeff Cline reports that bids come back within 72 hours when the data is correct and a header sample is provided. Results vary; not a guarantee.
- Scrub, sign, ship, collect. Data is de-identified inside your environment, licensed under a written agreement, delivered, and you are paid. In Jeff Cline's experience, deals typically close in about 90 days. Results vary; not a guarantee.
The full walk-through is on how it works.
The window for construction data will not stay open
Construction AI is in its training phase now. Once those models have absorbed how RFIs, submittals and change orders behave, the next dataset saying the same thing is worth less. Whoever holds unique data holds the keys, but only while it stays unique. If you have years of Procore history, getting a no-cost valuation now is the low-risk way to learn what it is worth before the market fills up.
How to request a bid for your Procore data
- Count projects. Open the company project list with all statuses showing and note the total and the earliest start date.
- Count RFIs. Ask your Procore admin for an RFI count across all projects, or add up the totals from each project's RFI tool.
- Request a bid. Submit your tool, years, user count and volumes at /get-a-bid.
- Share a header sample. Export RFIs, submittals, change orders and daily logs and send only the column names.
- Choose an offer. Compare buyer bids and approve de-identification, licensing and delivery.
Frequently asked questions
Is Procore data valuable to AI companies?
Yes. RFIs, submittals, change orders and daily logs show how construction projects really move, which is rare training material for project-risk, scheduling and coordination models. Value depends on project count, years of history and how consistently your team used Procore.
Will project names, owners or addresses be shared?
No. Project names, owner identities, site addresses and company names are removed or generalized before delivery, and people are replaced with role labels or anonymous IDs. We never take HIPAA/PHI data or personal customer data. Everything is de-identified before it leaves your control.
Do my owner contracts allow me to license project data?
It depends on the contract. Some owner agreements limit how project information can be used or shared, even in de-identified form. Review your contracts and talk to your attorney before you license anything.
What do I need to send to get a Procore bid?
Your project count, RFI count, earliest project date and a header sample. The header sample is only the column names from your exports, with no records included.
How quickly can I get an offer?
According to founder Jeff Cline, bids come back within 72 hours if the data is correct and a header sample is provided, and deals typically close in about 90 days. Results vary; not a guarantee.
Updated November 19, 2026.
OpenDataPolicies.org connects businesses with buyers of de-identified operational data. We are not a law firm, broker-dealer or investment adviser, and nothing on this site is legal, tax or financial advice. Statements about amounts, timing and outcomes are Jeff Cline's statements based on past transactions. Results vary; nothing here is a guarantee of any bid, price, buyer or closing. Every deal depends on the data, its quality, its rights and buyer demand at the time.